Space Heater For You

17100 Btu – Fan Forced Washdown Unit Heater – 208v – Phase 1 Review

17100 Btu – Fan Forced Washdown Unit Heater – 208v – Phase 1 Overview

FAN FORCED WASHDOWN UNIT HEATERS 5,000 Watt Heater 208V Heavy-duty washdown electric unit heaters are designed for use in dirty, dusty environments that require equipment washing or hosing. Washdown heaters are corrosion resistant, totally enclosed and water-tight making them ideal for industrial heating applications. Fan forced heaters are made with a heavy duty 304 grade, 16 gauge stainless steel shroud and stainless steel finned tubular element. Totally enclosed motor with automatic reset thermal cutout. Rotating front grill directs airflow. These electric unit heaters feature built-in controls and safety temperature controls wired in non-metallic NEMA 4x control panel with single-point power connections. Features 24V control, 3-position switch, pilot light and capillary style thermostat. Control panel on bottom allows ease of installation and service. Disconnect switch has an enclosure door interlock. Minimum mounting height is 7. ABS type approved. ETL listed. 1 Year Limited Warranty. 19.75 L. 12.00 W. 18.00 H.
(continue reading…)

SEPTLS373HS50K – Portable Kerosene Forced Air Heaters Review

SEPTLS373HS50K – Portable Kerosene Forced Air Heaters Feature

• Working Area – 1200.00 sq. ft. [Max]
• Tank Cap. – 4.0 gal
• Fuel Type – Kerosene
• Run Time – 11.00 h [Max]
• Output Power – 50000 Btu/h [Max]

SEPTLS373HS50K – Portable Kerosene Forced Air Heaters Overview

Portable Kerosene Forced Air Heaters
(continue reading…)

Fan Forced Horizontal Discharge Unit Heater – 48kw, 480v, 3ph Review

Fan Forced Horizontal Discharge Unit Heater – 48kw, 480v, 3ph Overview

This Horizontal Discharge Suspended Unit Heater is ideal for dirty, dusty environments and for high altitude applications up to 13,000 ft. Made using 18 gauge steel cabinet with powder coated finish. Control compartment includes a hinged and latched access door for easy wiring installation and maintenance. Circular copper clad steel heating element has continuously brazed steel fins formed to match the air delivery pattern of the fan blade. Fan assembly is enclosed by a heavy gauge, closed space with chrome plated wire guards. Louvers are individually adjustable for direction control of air flow. Automatic reset type limit controls for overheat protection. Totally enclosed, single phase permanently lubricated and thermally protected motor is mounted on rubber insulators to minimize vibration and noise. Features sleeve bearing motor. Factory Installed Options must be purchased with same order as unit heater; factory installed options include powder coated Epoxy finish, Heat Purge Fan Delay Switch, Summer Fan Switch and Disconnect Switch. 33.00 L. 29.00 W. 21.00 H.
(continue reading…)

Horizontal Or Vertical Discharge Fan Forced Suspended Unit Heater 3300w 208v Review

Horizontal Or Vertical Discharge Fan Forced Suspended Unit Heater 3300w 208v Overview

HORIZONTAL OR VERTICAL DISCHARGE FAN FORCED SUSPENDED UNIT HEATERS 3,300 Watt Heater 208V Suspended unit heaters can be installed for either vertical or horizontal discharge applications. Discharge fan forced heaters have an 18 gauge steel cabinet housing with a long-lasting powder coat finish. These fan forced heaters feature spiral fin steel element with continuously brazed steel fins that allow side draw through airflow. Fan forced heaters include individually adjustable louvers for directional control of air flow up to 15 from straight horizontal position. The automatic reset limit de-energizes these heaters if over-heating occurs. Fan over-ride purges electric heaters of residual heat at shutdown. Control compartment housing has a hinged and latched access door that allows access to wiring for installation and maintenance. Suspended unit heaters feature a totally enclosed 1-speed permanently lubricated thermally protected motor with unit bearings. UL approved. 1 year warranty. 17.75 L. 6.50 W. 14.47 H.
(continue reading…)

Fan Forced Architectural Wall Heater, 4,000/2,000w At 208v Review

Fan Forced Architectural Wall Heater, 4,000/2,000w At 208v Overview

Fan Forced Architectural Wall Heater, 4,000/2,000W at 208V – Berko’s high-capacity, heavy-duty fan forced wall heaters are designed for use almost anywhere in commercial or industrial areas requiring high capacity and quick recovery. They perform exceptionally well in such applications as motels, entryways, stores, public rest rooms, warehouses and other large, hard to heat areas. Features steel finned metal sheath electric heating elements with low sheath temperatures provide uniform heat and long service life. Closely spaced grille bars discourage insertion of foreign objects and direct air downward to effectively distribute heat keep floors warm and dry. Integral thermostat for quick installation separate thermostat not necessary. (Range: 40 – 90 F.) FRC has tamper resistant thermostat adjustable with a narrow blade screwdriver through the bar grille. Thermal overheat protector disconnects power in case of overheating due to accidental blockage. Built-in power disconnect switch for added safety during maintenance. Built-in fan delay switch energizes fan motor only after elements are heated prevents discharge of unheated air. When heat shuts off, de-energizes fan motor after residual heat has been dissipated. Can be wired with standard 60C wire. Permanently lubricated totally enclosed fan motor provides long life and low maintenance; gently distributes warmth throughout room area. Contemporary steel bar grille with durable polyester powder coat finish and satin finished aluminum frame retains attractive appearance through years of use. Recess or surface mount in standard 2″ x 4″ stud walls. 208 Volts, 1 Phase, 4000/2000 Watts, 19.2 / 9.6 Amps. 21.69 L. 17.19 W. 8.19 H.
(continue reading…)

Fan Forced Architectural Wall Heater, 3,000/1,500w At 277v Review

Fan Forced Architectural Wall Heater, 3,000/1,500w At 277v Overview

Fan Forced Architectural Wall Heater, 3,000/1,500W at 277V – Berko’s high-capacity, heavy-duty fan forced wall heaters are designed for use almost anywhere in commercial or industrial areas requiring high capacity and quick recovery. They perform exceptionally well in such applications as motels, entryways, stores, public rest rooms, warehouses and other large, hard to heat areas. Features steel finned metal sheath electric heating elements with low sheath temperatures provide uniform heat and long service life. Closely spaced grille bars discourage insertion of foreign objects and direct air downward to effectively distribute heat keep floors warm and dry. Integral thermostat for quick installation separate thermostat not necessary. (Range: 40 – 90 F.) FRC has tamper resistant thermostat adjustable with a narrow blade screwdriver through the bar grille. Thermal overheat protector disconnects power in case of overheating due to accidental blockage. Built-in power disconnect switch for added safety during maintenance. Built-in fan delay switch energizes fan motor only after elements are heated prevents discharge of unheated air. When heat shuts off, de-energizes fan motor after residual heat has been dissipated. Can be wired with standard 60C wire. Permanently lubricated totally enclosed fan motor provides long life and low maintenance; gently distributes warmth throughout room area. Contemporary steel bar grille with durable polyester powder coat finish and satin finished aluminum frame retains attractive appearance through years of use. Recess or surface mount in standard 2″ x 4″ stud walls. 277 Volts, 1 Phase, 3000/1500 Watts, 10.8 / 5.4 Amps. 21.69 L. 17.19 W. 8.19 H.
(continue reading…)

16380 Btu – Fan Forced Wall Heater Without Summer Fan Switch – 240v Review

16380 Btu – Fan Forced Wall Heater Without Summer Fan Switch – 240v Overview

FAN FORCED WALL HEATERS WITHOUT SUMMER FAN SWITCH 4800 Watt Heater without Thermostat -240V Fan forced wall mount heaters have an 18 gauge steel front with scratch resistant powder coat finish. Electric heaters feature an automatic reset thermal limit and steel block fin element. Vane axial fan blade is powered by a 600 RPM motor that projects airflow up to 175 CFM. Watts are selectable at time of installation; factory wired to higher wattage. Rough in dimensions are 14-3/16″W x 19-15/16″H x 4″D. Grill measures 15-3/8″W x 20-1/8″H. UL listed and CSA approved. 1 year warranty. 19.94 L. 4.00 W. 14.19 H.
(continue reading…)

240v Fan Forced Garage/Shop Heater Review

240v Fan Forced Garage/Shop Heater Overview

This Portable heater provides a 43 F air heat rise utilizing up to 13,648 BTU’s heating. Steel tubular heating element includes energized and overheat alarm pilot lights and automatic reset limit control. Fan forced heater features temperature control thermostat. Includes 6′L power cord with 20 amp NEMA#6-20P configuration plug. Mounting bracket allows mounting to wall or ceiling. Mounting bracket includes pivot-action for heater rotation. Measures 10-1/4″W x 7-1/2″D x 12″H. 240/208V. UL listed for residential, commercial or industrial use. 1 year warranty. 13.25 L. 11.25 W. 10.75 H.
(continue reading…)

68260 Btu – Fan Forced Washdown Unit Heater – 600v – Phase 3 Review

68260 Btu – Fan Forced Washdown Unit Heater – 600v – Phase 3 Overview

FAN FORCED WASHDOWN UNIT HEATERS 20,000 Watt Heater 600V Heavy-duty washdown electric unit heaters are designed for use in dirty, dusty environments that require equipment washing or hosing. Washdown heaters are corrosion resistant, totally enclosed and water-tight making them ideal for industrial heating applications. Fan forced heaters are made with a heavy duty 304 grade, 16 gauge stainless steel shroud and stainless steel finned tubular element. Totally enclosed motor with automatic reset thermal cutout. Rotating front grill directs airflow. These electric unit heaters feature built-in controls and safety temperature controls wired in non-metallic NEMA 4x control panel with single-point power connections. Features 24V control, 3-position switch, pilot light and capillary style thermostat. Control panel on bottom allows ease of installation and service. Disconnect switch has an enclosure door interlock. Minimum mounting height is 7. ABS type approved. ETL listed. 1 year warranty. 28.75 L. 16.00 W. 27.00 H.
(continue reading…)